![]() When using larger drills later on, the hole in the tile can be enlarged step by step without risking spalling of the tile. Our tip: If you want to avoid damage to smooth surfaces, you can first drill a hole in the tile with a small drill bit. Once the hole has been drilled and the substrate has not been damaged, you can sink a dowel into the hole and screw a screw into the dowel. During the actual drilling process, you should make sure that you place the drill at a right angle to your wall and drill through the tile with very low pressure and at low speed. This drill avoids excessive heating of the tile and reduces the risk of damage to the substrate. Even better are water-cooled diamond drills, which are cooled by a small water tank. A tile and glass drill is best suited for smooth surfaces. In this way, you can prevnt your tiles from spalling when drilling later.įor the choice of the right drill we recommend you to pay attention to the underground. After that, it is best to stick transparent adhesive tape in the shape of a cross over the torn area. Afterwards you can mark this area with a small nail or screw. You can mark the position of the borehole with a small felt-tip pen on the tile. Before you start drilling, you should already have checked that there are no water or power lines in the wall behind the planned drill hole. Therefore, you should only cover tiles with plugs and screws or with a nail if it cannot be avoided. In many rented apartments, the drilling of tiles is not permitted or may only be carried out in agreement with the landlord.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |